Singer XL-420 Manuel D'instructions page 84

1. If stitches are missing.
If the embroidery machine detects that the thread has
automatically stops.
though the embroidery design to the area where you
want to resume stitching.
1. Press the reverse stitch button (stitch return) to step
area has been passed over.
2. Restart the embroidery machine and continue
embroidering.
machine lights are flashing lights and
Upper thread is not in the thread tension. Rethread
upper thread, (see page 16 - 17 "Threading the Top
Thread".) Placing the small net that is supplied with the
accessories over the spool of thread may ensure that the
thread is unwinding properly.
82
Embroidering direction
Direction de broderie
Dirección de bordado
1
3
Puntadas en blanco resultantes de ruptura de hilo
Embroidered section
Section brodée
Sección bordada
2
4
6
8
5
7
automatically stop
S'arrête automatiquement
Para automáticamente
Reverse stitch button
Interrupteur couture arrière
Interruptor de puntadas
hacia atrás