Knee Lifter; Endless Embroidery Hoop - Singer XL-420 Manuel D'instructions

KNEE LIFTER

machine applique and free-motion sewing. It allows you to
Attention: Do not touch or move the knee lifter while
sewing, otherwise the machine beeps with an error
message and stops.

ENDLESS EMBROIDERY HOOP

Hoop, the Futura software will automatically add "alignment
stitches" in the corners of your design, allowing you to
reposition the hoop accurately for continuous sewing.
use other designs as endless embroidery as well because the
software will automatically add the alignment stitches for you.
Hoop the Fabric
embroidered has a very straight edge so that it will line up
evenly along guide (A).
hoop(C). This opens the hoop.
3. Place the fabric with stabilizer between the outer hoop (D)
and the inner hoop (C). Position the fabric edge so that it is
parallel along guide (A), evenly from top to bottom.
Snap it in place to close the hoop.
edge to the other end of the fabric
108
C
D
A
B
A
B