Singer XL-420 Manuel D'instructions page 66

HOOP
NOTE: For information about using appropriate stabilizer, see
page 66 - 67.
1. Loosen hoop adjusting screw and place fabric between
NOTE: Apply stabilizer when appropriate, see page 66 - 67.
2. Slightly tighten the hoop adjusting screw and pull fabric
Fit the two frames together by pressing down on the inner
frame.
a. Tighten hoop adjusting screw.
b. Once fabric is properly positioned in embroidery frame
Once fabric is properly positioned in embroidery frame
hoop only).
64
1
2
Hoop adjusting screw
Vis de réglage de cerceau
Tornillo de ajuste de aro