Machine Installation And Start-Up - illy IPERESPRESSO Y3.3 Manuel D'utilisation

EN

MACHINE INSTALLATION AND START-UP

When used for the first time, or if the machine has been turned off for a long period of time, wash the tank before filling it. Furthermore it is recommended to dispense at
least 3 mugs of water to rinse the internal machine circuits, proceeding as follows.
Remove the tank, pushing it downwards.
Connect the machine to the power outlet.
26
1
Turn the tank outwards.
5
1-2 sec.
Turn on the machine by pressing one of the two
coffee buttons for 1-2 sec.
2
Fill the tank with fresh water to the maximum
level.
6
Make sure there are no capsules in the machine. The
3
Reinsert the tank where the two slots are
and push it towards the machine until fully
engaged.
Make sure that the tank is completely engaged.
7
and buttons will start to flash.
4
8