After The Massage; Cleaning - SilverCrest SSMN 3 B2 Mode D'emploi

GB

After the massage

Cleaning

50
■ Press the "On / Off " button
slow massage.
■ Press the button "Massage"
the button "Massage"
■ Press the "Warmth" button
7 illuminates. Press the "Warmth" button
button
switch the warmth function off . The "Warmth" button
illuminated.
■ Press the button "Vibration"
8 once again to switch the function "Vibration" off .
"Vibration"
NOTICE
► The appliance switches off automatically after 15 minutes.
■ If you want to terminate the massage before the end of 15 minutes and wish
to switch the appliance off , press the "On/Off " button
1) Disconnect the connection plug 0 from the socket 4.
2) Undo the hook and loop fastening 2 and remove the appliance.
3) Disconnect the mains adapter 9 from the mains power socket.
RISK OF ELECTRIC SHOCK
Before you clean the appliance, always disconnect the mains adapter 9
►
from the mains power socket.
► UNDER NO CIRCUMSTANCES should you immerse the appliance in
water or other liquids during cleaning!
WARNING - PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.
NOTICE
► The zipper on the appliance must not be opened, because it is fi tted only
for production-technical reasons.
5. The massage heads 1 begin with the
6 to increase the massage speed. Press
6 once again to stop the massage heads 1.
7 to switch the warmth on. The "Warmth"
8 to switch the vibration on. Press the button
7 once again to
7 is no longer
5.
SSMN 3 B2