Maintenance; Daily Maintenance; 10- Hour Maintenance - Shindaiwa B530 Manuel D'utilisation

Before performing any maintenance, repair, or cleaning work on your unit, make sure the engine and cutting attach-
ment are completely stopped. Disconnect the spark plug wire before performing service or maintenance work.
Never repair a damaged blade by welding, straightening, or by modifying its shape. An altered blade may break dur-
ing operation, resulting in serious personal injury.

Daily Maintenance

1. Cylinder fins

10- Hour Maintenance

1. Unscrew fastener
10/15 Hour Maintenance
a: 0.6 - 0.7 mm
50-Hour Maintenance
WARNING
2. Air intake
2. Air filter element

Maintenance

Prior to each work day, perform the following:
Remove the dirt and debris from the engine, check the cool-
ing fins and air cleaner for clogging, and clean them as nec-
essary.
Carefully remove any accumulations of dirt or debris from
the silencer and fuel tank. Check cooling air intake area at
base of crankcase. Remove all debris. Dirt build-up in these
areas can lead to engine overheating, fire, or premature
wear.
Clean any debris or dirt from the cutting attachment.
Check for loose or missing screws or components. Make
sure the cutting attachment is securely fastened.
Check the machine for leaking fuel or grease.
(more frequently in dusty conditions)
Remove the air cleaner cover by loosening the unscrew fas-
tener and lifting.
Remove the air cleaner element.
Clean or replace as necessary.
Wash clement thoroughly in soap and water.
Let element dry before reinstalling the element.
Replace air cleaner cover.
Never operate the unit if the air cleaner assembly is
damaged or missing.
Remove and clean the spark plug. Adjust the spark plug elec-
trode gap to 0.6 - 0.7 mm. If the plug must be replaced, use only
a NGK BMR6A.
IMPORTANT
Before removing the spark plug, clean the area around the plug
to prevent dirt and dust from getting into the engine's internal
parts.
Lubricating the unit
29
Maintenance
CAUTION