Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
■
Please have the till receipt and the item number
(e.g. IAN 329699_2001) available as proof of
purchase.
■
You will find the item number on the type plate
on the product, an engraving on the product,
on the front page of the operating instructions
(below left) or on the sticker on the rear or
bottom of the product.
■
If functional or other defects occur, please
contact the service department listed either by
telephone or by e-mail.
■
You can return a defective product to us free of
charge to the service address that will be pro-
vided to you. Ensure that you enclose the proof
of purchase (till receipt) and information about
what the defect is and when it occurred.
You can download these instructions
along with many other manuals,
product videos and installation
software at www.lidl-service.com.
This QR code will take you directly to the Lidl ser-
vice page (www.lidl-service.com) where you can
open your operating instructions by entering the
item number (IAN) 329699_2001.
WARNING!
►
Have your tools repaired by the Service
Centre or a qualified electrician and only
using genuine replacement parts. This will
ensure that the safety of the tool is main-
tained.
►
Ensure that the power plug or the mains
cable is replaced only by the manufacturer
of the tool or by an approved customer
service provider. This will ensure that the
safety of the tool is maintained.
28
│
GB │ IE
■
Service
Service Great Britain
Tel.: 0800 404 7657
E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 329699_2001
Importer
Please note that the following address is not the
service address. Please use the service address
provided.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
PSBSAP 20-Li A1