Kollmorgen AKM Serie Manuel D'installation page 9

1.2.4.2 Packaging
Cardboard packing with Instapak® foam cushion.
l
You can return the plastic portion to the supplier (see "Disposal").
l
Motor
type
AKM1
AKM2
AKM3
AKM4
1.2.4.3 Storage
Climate category 1K4 according to EN61800-2, IEC 60721-3-2
l
Storage temperature: - 25...+55°C, max. variation 20K/hr.
l
Humidity: rel. humidity 5% - 95%, no condensation
l
Store only in the manufacturer's original recyclable packaging
l
Max. stacking height: see table in chapter "Packaging"
l
Storage time: unlimited
l
1.2.4.4 Maintenance / Cleaning
Maintenance and cleaning only by qualified personnel
l
The ball bearings should be replaced after 20,000 hours of operation under rated con-
l
ditions (by the manufacturer).
Check the motor for bearing noise every 2500 operating hours, respectively each year. If
l
any noises are heard, stop the operation of the motor, the bearings must be replaced (by
the manufacturer).
Opening the motor invalidates the warranty.
l
If the housing is dirty, clean housing with Isopropanol or similar, do not immerse or spray
l
1.2.4.5 Repair / Disposal
Repair of the motor must be done by the manufacturer. Opening the motor invalidates the
warranty. In accordance to the WEEE-2002/96/EG-Guidelines we take old devices and
accessories back for professional disposal, if the transport costs are taken over by the
sender. Send the motor to:
KOLLMORGEN Europe GmbH
Pempelfurtstr. 1
D-40880 Ratingen
Packing Max. stacking
height
Cardboard 10
Cardboard 10
Cardboard 6
Cardboard 6
AKM Installation | 1 English
Motor Packing
type
AKM5 Cardboard
AKM6 Cardboard
AKM7 Cardboard
AKM8 Pallet
Kollmorgen | May 2016
Max. stacking
height
5
1
1
1
9