Washdown And Washdown Food - Kollmorgen AKM Serie Manuel D'installation

1.4.14 Washdown and Washdown Food

These motor variants are used in applications that are subject to strict hygiene regulations in
which it is essential that the formation of nuclei and corrosion are avoided and in which
machines must be cleaned cyclically.
The motors are based on the standard types AKM2 - AKM6 with special modifications for
use in the food-processing industry or even in the packaging industry. In addition, it is also
possible to coat the flange in each case – but then it is not possible to assure tolerance class
N for the flange.
In the type code, the coating of the motor housing (type "W" for Washdown, "F" for Wash-
down Food) is defined separately in the version (last two digits) and the flange coating.
Washdown/Washdown
Food Motor
AKM2
AKM3, 4, 6
AKM5
* Do not turn the connector on the motor more than +/- 180 °, greater rotation angle will dam-
age the internal connections.
1.4.14.1 Washdown
AKM^^^-^^^^^-^W
AKM^^^-W^^^^^-^W
The Washdown motors must not come into contact with any unpacked foodstuffs.
Application Area:
Example:
Standards:
Surface:
Immunity:
Degree of protection: IP67
Shaft:
Rotary shaft seal:
Lubricant:
Connector:
Screws:
Name plate:
Size:
Connector Suggested mating connector
Options
B*, D*, G Option B, C, D, G:
Power & Brake:
BSTA-108-NN-00-08-0036
C*, D*, G
Feedback 12-pin:
ASTA-021-NN-00-10-0035
C*, D*, G
Feedback 18-pin:
ASTA-035-NN-00-10-0035
Washdown without flange coating
Washdown with flange coating of IEC A flange
Harsh environments, outdoors
Transport in the foodstuff and packing area without contact with
foodstuff, radar stations, wind turbines, offshore installations
UL, CE, RohS
Silver coating
Against tested industrial cleaning agent (➜ # 20), corrosion-proof
Stainless steel
PTFE
Industrial bearing grease, non-food-grade
Stainless steel, smooth surface
Stainless Steel
Engraved, additional nameplate in the package
AKM2 - AKM6
AKM Installation | 1 English
Flange
Options
A, B, W, R
A, B, W, R
B, C
Kollmorgen | May 2016 19