Receiver Connection Options - Reely SKY Tiger Moth Notice D'emploi


14.

Receiver Connection Options

On its right hand side, the receiver offers the option of connecting up to 6 servos (CH1 - CH6) The connections are
intended for Futaba plugs protected against polarity reversal and can also be used with JR plugs if required.
When connecting servos and speed controllers, always make sure of correct polarity of the plug connectors. The plug-
in contact for the impulse line (yellow, white or orange, depending on the manufacturer) must be connected to the
upper of the three vertically placed pin contacts. The plug-in contact for the negative line (black or brown, depending
on the manufacturer) must be connected to the bottom one of the three pin contacts.
The connections are assigned as follows:
CH1 = Aileron function
CH2 = Elevator function
CH3 = Engine function
CH4 = Rudder function
Figure 29
The signals for outputs CH5 and CH6 are not assigned on the transmitter and therefore have no function. However,
they could be used to connect a receiver battery if the remote control is installed in another model.
60