During Operation - Reely SKY Tiger Moth Notice D'emploi

2.4ghz rtf
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• If batteries are used as a transmitter power supply, make sure that they have sufficient remaining capacity (battery
checker). If the batteries are empty, always replace the complete set, never individual cells only.
• Before operation, always control the settings of the trim slider on the transmitter for the various steering directions
and, if necessary, adjust them.
• Always angle the transmitter aerial towards the side of the model. This is how you will achieve best signal transmis-
sion to the model. Transmission to the model is lowest when you point the transmitter aerial tip directly at the model.
• Always check if the rotor is correctly and securely installed before operating the product.
• Make sure that no objects or body parts are in the range or the suction area of the rotor while it is rotating.
c) During Operation
• Do not take any risks when operating the product! Your own safety and that of your environment is solely down to
you being responsible when dealing with the model.
• Improper operation can cause serious damage to people and property! Therefore make sure to keep a sufficiently
safe distance to persons, animals or objects during operation.
• Select a suitable area to operate your model plane.
• Fly your model only if your ability to respond is unrestricted. The influence of tiredness, alcohol or medication can
cause incorrect responses.
• Do not direct your model towards spectators or towards yourself.
• The motor, the speed controller and the flight battery can heat up during operation. For this reason, wait for 5 to 10
minutes before recharging or replacing the flight battery. The drive engine must cool down to ambient temperature.
• Never switch off the remote control (transmitter) while the model is in use. After landing, always disconnect the flight
battery first. Only then may you switch off the remote control.
• In case of a defect or a malfunction, remove the problem before using the model again.
• Never expose your model or the remote control to direct sunlight or excessive heat for an extended period of time.
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

20 90 76

Table des Matières