Inserting The Vertical Tail - Reely SKY Tiger Moth Notice D'emploi

b) Inserting the Vertical Tail
Before inserting the vertical tail (1) into the prepared slot in
the end of the fuselage (2) according to the adjacent figure,
cut off the lower corner of the dampening area (3) diago-
nally.
After indenting the slot for the vertical tail with a pointy file to
the rounded part at the rear end (4), the vertical tail can be
inserted easily.
The elevator frame (5) must be at the centre in the vertical
tail opening so that the elevator can deflect upwards and
downwards.
Figure 8
47