Lumie Bodyclock ELITE 300 Notice D'utilisation page 6

BCEI0408 repag:Layout 1 6/5/08
English
Volume auto-fade
If you use audio features before going to sleep, you might like the
volume to automatically fade down. Program options maintain
constant volume for 22 minutes then volume auto-fade is triggered
at specific dim light levels. W displayed when auto-fade is selected.
Program options:
SLEEP SOUND OFF (default) - no auto-fade, volume controlled
manually.
SLEEP SOUND PERM
- constant volume then fades down to
continuous low volume. W
SLEEP SOUND AUTO
- constant volume then fades to low
volume (or off if the light is off at this point). Remains at low volume
then fades to off when the light turns off*. W
Make sure A is down.
SLEEP SOUND OFF
Press P to search for e.g.
Use Lamp -/+ to change settings.
Wait 12 seconds until the program display clears or press P to skip
to another program.
*If you've selected a nightlight option (see Nightlight): Remains at low
volume then fades to off when the light reaches nightlight level.
Display auto-fade
Adjusts the brightness of the display to minimise sleep distractions.
Display auto-fade is triggered at specific dim light levels.
Program options:
DISPLAY AUTO
(default) – high setting then drops to continuous
low setting.
DISPLAY HIGH – no auto-fade, constant high setting.
DISPLAY AUTO OFF
– high setting then drops to low setting.
Remains at low setting then turns off when the light turns off*.
10 | www.lumie.com | lumie careline 01954 780500
12:00 Page 10
.
English
Make sure A is down.
DISPLAY AUTO
Press P to search for e.g.
Use Lamp -/+ to change settings.
Wait 12 seconds until the program display clears or press P to skip
to another program.
*If you've selected a nightlight option (see Nightlight): Remains at low
setting then turns off when the light reaches nightlight level.
Sunrise duration
Choose a short or long sunrise to suit you. Using
an example, when the alarm time is set to 07:00, the light will gently
come on at 06:30 and gradually increase to full brightness over 30
minutes.
Program options:
SUNRISE 15
- the light takes 15 minutes to reach full brightness.
SUNRISE 30
(default) - the light takes 30 minutes to reach full
brightness.
SUNRISE 60
- the light takes 60 minutes to reach full brightness.
SUNRISE 90
- the light takes 90 minutes to reach full brightness.
Make sure A is down.
Press P to search for e.g. SUNRISE 30
Use Lamp -/+ to change settings.
Wait 12 seconds until the program display clears or press P to skip
to another program.
www.lumie.com | lumie careline 01954 780500
.
SUNRISE 30
as
.
| 11