Publicité
Les langues disponibles
Les langues disponibles
USE
Before first use, clean all parts of the refrigerator with a soft cloth dampened
in lukewarm water and a mild detergent. Rinse them thoroughly with clean
water and dry them with a dry cloth.
Note: The electrical parts of the refrigerator can only be cleaned with a dry
cloth.
Place the thermostat knob in position "3", then turn on the appliance. The
compressor is running and the interior light of the refrigerator comes on.
Close the door. After 30 minutes, if the temperature in the refrigerator drops
significantly, it shows that the refrigeration system is working properly. When
the refrigerator has been running for a while, the temperature will adjust to
the setting made, provided you do not leave the door open for too long.
If the above steps have been completed successfully, the setup operations
are complete. The refrigerator is operating normally.
The device is supplied with two plastic tips (in the plastic bag in the user
manual). After installing these end caps, the unit can no longer be
pushed against the wall to ensure adequate ventilation. Insert the end
caps into the corresponding openings on the back of the device, then
screw them on.
Place the device against a wall with a free distance not exceeding
50-75mm.
EN - 16
Publicité
