Güde Li-Ion 108 Mode D'emploi page 7

Introduction
Please read thoroughly this operation manual and
attached safety instructions to enjoy your machine. We
further recommend to retain the operation manual for
future references. We reserve right to make technical
changes for the purpose of improvement in the course of
continuous product development.
This is the original operation manual.
Scope of supply
Unpack the appliance and check completeness and
delivery of the following components:
# 58011 CORDLESS DRILL/DRIVER LI-ION 108
• Plastic case
• 6 metal drills of 1 – 6 mm
•
6 bit extensions including fixing
•
Charger
• original user guide
# 58014 CORDLESS DRILL/DRIVER LI-ION 180
•
Plastic case
• 6 metal drills of 1.5 – 6 mm
•
6 bit extensions (PH1/2, PZ1/2, 5/6 groove)
•
Bit holder
•
Charger
• original user guide
Please contact your seller if you either miss some
components or the components are damaged.
Description of the appliance
Li-on cordless screwdriver with soft grip. Lithium-ion
technology for fast, flexible and simple working.
Pic. 1:
1. Torque adjustment
2. Quick chuck
3. Rotation direction switch
4. On/Off
5. Accumulator
6. Charger
7. Charger cable
8. Snap button
9. LED diode
10. Accumulator capacity signalling
11. Level selection switch (#58014 only)
12. Magnetic holder (#58011 only)
13. Charge level indicator
Technical data
CORDLESS DRILL/DRIVER LI-ION 108
Accumulator voltage:
Accumulator capacity:
Speed range:
Torque levels:
Max. torque:
Chuck fixing range:
Charging time:
Weight:
Dimensions:
CORDLESS DRILL/DRIVER LI-ION 180
Accumulator voltage:
Accumulator capacity:
Idle speed at 1/2 level:
Torque levels:
Max. torque:
Chuck fixing range:
Charging time:
Weight:
Dimensions:
#58011:
10.8 V
1.35 Ah
-1
0-600 a min
15 + 1
12 Nm
1.5 – 10 mm
3 – 5 hours
2.1 kg
l: 210 x w: 60 x h: 200 mm
#58014:
18 V
1,3 Ah
-1
0-330 / 0-1300 min
19 + 1
28 Nm
1,0 – 10 mm
1 hours
3 kg
l: 220 x w: 80 x h: 245 mm
General safety instructions
Read this user guide thoroughly. Make sure you know the
controls and correct use of the appliance. Store the user
guide safely for future reference.
Safe work
Keep your workplace tidy!
Disorder on workplace may result in injuries.
Consider surrounding conditions!
Do not expose to rain.
Do not use in moist or wet environment.
Provide good lighting.
Do not use close to flammable liquids or gases
Store your device properly!
The device, if not used, should be stored in a dry and
closed space, out of reach of children.
Do not overload your device!
Operate the appliance within specified working capacity.
Use correct device!
Do not use the device for purposes other than intended.
Use the right appliance!
Do not use the appliance for purposes for which it has not
been designed.
Take care of your appliance!
Observe maintenance directions and instructions.
Check appliance cable regularly and ask an authorized
specialist to replace the same if damaged.
Be careful!
Be aware of what you are doing. Approach your work with
sound mind. Do not use the device if you are tired.
WARNING!
Use of non-compliant accessories may result in an injury.
Have your device repaired by an electrician only!
This device complies to applicable safety provisions.
Repairs may be performed by an electrician with the use of
genuine spare parts, otherwise the user may be exposed
to injury hazard.
Safety instructions specific for this device
Switch the appliance off before working on it.
Wear protective glasses.
Risk from rotating drill.
Pay attention to prevent injury of persons standing
nearby and their hitting by thrown-off items.
Wait until all parts of the appliance stop before touching
any part of it.
Never expose the appliance to rain or moisture. To
be kept in a dry place only.
Children, persons not acquainted with the appliance and
persons with limited psychical, sensory or mental abilities
must not use this appliance.
Original accessories to be used only.
7