Specifications - Yamaha RX-596 Mode D'emploi

Masquer les pouces Voir aussi pour RX-596:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AUDIO SECTION
Minimum RMS Output Power per Channel
8 ohms, 20 Hz to 20 kHz, 0.025% THD
.......................................................80W+80W
6 ohms, 20 Hz to 20 kHz, 0.05% THD
.......................................................90W+90W
Maximum Power (EIAJ) [General model only]
8 ohms, 1 kHz, 10% THD......................130W
6 ohms, 1 kHz, 10% THD......................150W
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring
method)
8/6/4/2 ohms....................120/140/180/200W
Power Band Width
8 ohms, 40W, 0.05% THD
.............................................10 Hz to 50 kHz
Damping Factor (SPEAKERS A)
8 ohms, 20 Hz to 20 kHz .............240 or more
Input Sensitivity/Impedance
PHONO MM......................2.5 mV/47 k-ohms
CD/TAPE 1/VCR·TAPE 2/LD·TV
.........................................150 mV/47 k-ohms
Maximum Input Signal
PHONO MM
1 kHz, 0.003% THD ........................115 mV
Output Level/Impedance
REC OUT (PHONO) .......150 mV/1.5 k-ohms
Headphones Jack Rated Output/Impedance
Output Level (8 ohms, 0.025% THD) .....0.3V
Impedance .....................................680 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TAPE 1/VCR·TAPE 2/LD·TV ......0±0.5 dB
RIAA Equalization Deviation
PHONO MM ....................................0±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO MM to REC OUT
3V....................................................0.003%
CD/TAPE 1/VCR·TAPE 2/LD·TV to SP OUT
40W/8 ohms ......................................0.01%
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM (5 mV Input Shorted) .......88 dB
CD DIRECT AMP SW: ON (Shorted)
.........................................................110 dB
Residual Noise (IHF-A Network)
CD DIRECT AMP SW: ON.....................35 µV
PURE DIRECT SW: ON.........................90 µV
Channel Separation
CD/TAPE 1/VCR·TAPE 2/LD·TV
(Input 5.1 k-ohms Terminated, 1 kHz)
...........................................................65 dB

SPECIFICATIONS

Tone Control Characteristics
BASS:
Boost/cut ...............±10 dB (20 Hz)
Turnover Frequency...........350 Hz
TREBLE: Boost/cut .............±10 dB (20 kHz)
Turnover Frequency..........3.5 kHz
Continuously variable LOUDNESS Control
(Level related equalization)
Attenuation............................ –30 dB (1 kHz)
VIDEO SECTION
Input Level/Impedance ...........1 Vp-p/75 ohms
Output Level/Impedance ........1 Vp-p/75 ohms
FM SECTION
Tuning Range
[U.S.A. and Canada models]
..........................................87.5 to 107.9 MHz
[Australia and General models]
..........................................87.5 to 108.0 MHz
50 dB Quieting Sensitivity (IHF, 75 ohms)
Mono .................................1.55 µV (15.1 dBf)
Stereo...................................21 µV (37.7 dBf)
Usable Sensitivity (75 ohms)
(30 dB S/N Quieting, 1 kHz, 100% mod.)
.............................................0.8 µV (9.3 dBf)
DIN, Mono (S/N 26 dB) ........................0.9 µV
DIN, Stereo (S/N 46 dB)........................24 µV
Image Response Ratio ............................45 dB
IF Response Ratio...................................70 dB
Spurious Response Ratio.........................70 dB
AM Suppression Ratio..............................55 dB
Capture Ratio ..........................................1.5 dB
Alternate Channel Selectivity ..................85 dB
Signal-to-Noise Ratio (IHF)
Mono/Stereo ..............................80 dB/75 dB
Harmonic Distortion (1 kHz)
Mono/Stereo .....................................0.1/0.2%
Stereo Separation (1 kHz)......................50 dB
Frequency Response
20 Hz to 15 kHz..............................0 ±1.5 dB
AM SECTION
Tuning Range
[U.S.A., Canada and General models]
.............................................530 to 1,710 kHz
[Australia model] .................531 to 1,611 kHz
Usable Sensitivity..............................100 µV/m
Selectivity ................................................32 dB
Signal-to-Noise Ratio ..............................50 dB
Image Response Ratio ...........................40 dB
Spurious Response Ratio .......................50 dB
Harmonic Distortion (400 Hz) ...................0.3%
AUDIO SECTION
Output Level/Impedance
FM (100% mod., 1 kHz)
..........................................500 mV/2.2 k-ohm
AM (30% mod., 400 Hz)
..........................................150 mV/2.2 k-ohm
GENERAL
Power Supply
[U.S.A. and Canada models]
..............................................AC 120V, 60 Hz
[Australia model] ...................AC 240V, 50 Hz
[General model]
....................AC 110/120/220/240V, 60/50 Hz
Power Consumption
[U.S.A. model] ......................................190W
[Canada model] .......................250W, 320VA
[Australia and General models] ............210W
Maximum Power Consumption
[General model only] ............................450W
AC Outlets
2 SWITCHED OUTLETS
[U.S.A., Canada and General models]
..........................................100W max. total
1 SWITCHED OUTLET
[Australia model]................100W max. total
Dimensions (W x H x D)
......................................435 x 151 x 389.8 mm
(17-1/8" x 5-15/16" x 15-3/8")
Weight............................9.5 kg (20 lbs. 14 oz.)
Accessories ...........................AM loop antenna
Indoor FM antenna
Remote control transmitter
Antenna adapter
(U.S.A. and Canada models only)
Specifications are subject to change without
notice.
Batteries
21

Publicité

Chapitres

Table des Matières
loading

Table des Matières