baltur LCM 100 Guide Rapide page 33

• Select bar using the arrow keys
• Press Enter
• Press Exit
• Select
• Press Enter
• Use to move to the set points to change the following
parameters,
- SWITCHING OFF (SET POINT + VALUE)
- COMMAND AT THE MINIMUM SETTING (SET POINT + VALUE)
- BOILER SET POINT
- SWITCHING ON (SET POINT - VALUE)
• Press Enter
• Press Exit
• Select
• Press Enter
• S e t t h e m i n .
(e.g. probe 0-16 bar 4 mA =0 / 20 mA =160)
13 / 18
0006081547_201210
twice to confirm
to return to the main screen.
to confirm.
to store the parameters.
to confirm.
a n d m a x . p r o b e v a l u e s