baltur LCM 100 Guide Rapide page 35

• Select with
• Press Enter
• Set the minimum and maximum external temperature,
• Press Exit
• Select with
• Press Enter
• Use to move to the set points to change the following
parameters,
- SWITCHING OFF (SET POINT + VALUE)
- COMMAND AT THE MINIMUM SETTING (SET POINT - VALUE)
- BOILER MINIMUM SET POINT
- SWITCHING ON (VALUE SET POINT)
• Press Enter
• Press Exit
• Select with
• Press Enter
15 / 18
0006081547_201210
,
,
to store the parameters.
,