Explanation Of Symbols Used; General Safety Instructions - WAGNER W 690 FLEXIO Traduction Du Mode D'emploi Original

W 690 Flexio

1. Explanation of symbols used

This symbol indicates a potential danger for you or for the device.
Under this symbol you can find important information on how to
avoid injuries and damage to the device.
Danger of electrical shock
Indicates tips for use and other particularly useful information.
i
Devices and accessories marked with this symbol are suitable for
processing low-viscosity materials such as paints, glazes and wall
paints specifically designed for this purpose.
If a material bears this logo, it is particularly well suited for use with
the relevant device.
Devices and accessories marked with this symbol are suitable for
processing high-viscosity materials such as e.g. interior wall paints
(dispersions and latex paints).
If a material bears this logo, it is particularly well suited for use with
the relevant device.

2. General Safety Instructions

Caution!
Read all the instructions. Non-observance of the instructions below can cause
electric shock, fire and or serious personal injuries. The term "power tool" used
below covers both mains-operated power tools (with mains lead) and
accumulator-operated power tools (without mains lead).
1. Safety at the workplace
a) Keep your workplace clean and well lit. Disorder or unlit workplaces may result in
accidents.
b) Never use the tool in hazardous areas that contain flammable liquids, gases
or dusts. Power tools generate sparks that can ignite the dust or vapors.
c) Keep children and other persons away when using the power tool. You can
lose control of the tool if you are distracted.
2. Electrical Safety
a) The tool plug must fit into the socket. The plug may not be modified in any form.
Do not use adaptor plugs together with protective-earthed tools. Unmodified
plugs and suitable sockets reduce the risk of an electric shock.
GB
21