Mennekes Professional+ E 7,4 / 22 Mode D'emploi page 98

After a power failure, it can happen that the char-
ging plug becomes mechanically interlocked by the
actuator. In this case, the charging plug cannot be
removed and must be unlocked manually.
Fig. 22: Unlocking the charging plug manually
u Open the product.
1 "5.4 Opening the product" [} 18]
u Loosen the red lever (1). The red lever is at-
tached with a cable tie close to the actuator.
u Insert the red lever into the actuator (2).
u Turn the red lever 90° in the clockwise direc-
tion.
u Unplug the charging plug.
u Remove the red lever from the actuator and
fasten it close to the actuator with a cable tie.
u Close the product.
1 "6.13 Closing the product" [} 36]
46
1
2