Installing Your New Appliance - Brandt BFA673YNX Manuel D'instruction

● Make sure that the mains
plug is accessible
installation of the appliance.
Service
● Any electrical work required to
do the servicing of the appliance

Installing your new appliance

Before using the appliance for the
first time, you should be informed of
the following tips.
Ventilation of appliance
ln order to improve efficiency of the
cooling system and save energy, it
is necessary to maintain good
ventilation around the appliance for
the dissipation of heat. For this
reason, sufficient clear space should
be available around the refrigerator.
Suggestion: it is recommended to
have 75 mm of space between the
back of the appliance and the wall,
at least 100mm from its top, at least
100mm between its side and the
wall and a clear space in front to
allow the doors to at 145° angle. As
shown in following diagrams.
after the
should be carried out by qualified
electrician or competent person.
● This product must be services
by an authorized Service Center,
and only genuine spare parts
must be used.
1) If the appliance is Frost Free
2) If the appliance contains
freezer compartment.
Relevant information (Constant /
mm)
W W1
908 387
Note!
● This appliance performs well in
the below climate class. It may not
work properly
temperature above or below the
indicated range for a long period.
Climate Ambient
Class temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
● Place your appliance in a dry place
to avoid high moisture.
D D1
600 1140
if left at a
6