Events; Motion Detection - Abus IPCA33500 Manuel Utilisateur

7.5.7 Events

7.5.7.1 Motion detection

Enable motion detection:
Enable dynamic analysis for motion:
NOTE: The LIVE INDICATOR function decides whether this should also be displayed in the live
image.
Preview area:
Draw Area:
Delete all:
Day/night switching:
Sensitivity:
Proportion of object on area:
enables motion detection.
if enabled, changes to the video image content are
displayed graphically in the preview.
preview and configuration area.
draw areas here (max. 8), which should be monitored by motion
detection. Operation: Press button -> draw rectangle in the preview
using left mouse button -> press button again to finish drawing.
delete all areas.
defines how motion detection is applied during the day or night mode.
Off: settings for day and night are identical.
Automatic switching: settings are automatically coupled to automatic
day/night switching.
Schedule: settings for day and night are applied according to a
schedule.
determines the required intensity of the pixel change. The higher
the value, the fewer pixel changes are required to trigger motion.
object size required for triggering motion in the area (0-100%).
101