Displaying And Deleting Ecg Measured Values; Transferring Measurements; Transfer Via Bluetooth ® Low Energy Technology - Beurer BM 93 Cardio Mode D'emploi

Background information and medical statistics for your doctor can be found in the "Annex for
attending doctor" document included with your device.

8.5 Displaying and deleting ECG measured values

The device has two user memories. Each user memory can store up to 60 measurements. Once
all memory spaces in a user memory have been used, the oldest measurements are replaced by
the most recent.
You can access stored measurements on the device at any time. Proceed as follows:
1. With the device switched off, press the memory button M. The last stored measured value in the
selected user memory is displayed.
To access the measured values in the second user memory, press and hold the memory
button M for 3 seconds..
2. To navigate between the individual measurements, press the memory button M.
If you want to delete the entire memory of the respective user, press the M memory button again
and press and hold it together with the START/STOP button

9. Transferring measurements

9.1 Transfer via Bluetooth
It is also possible to transfer the measured values saved onthe device to your smartphone using
Bluetooth ® low energy technology. You will need the "beurer HealthManager" app for this. The
app is available free of charge on the Apple App Store and from Google Play.
System requirements for the "beurer HealthManager" app
– iOS ≥ 10.0, Android™ ≥ 5.0
– Bluetooth ® ≥ 4.0
List of compatible devices:
® low energy technology
50
for 5 seconds.