Saving, Displaying And Deleting Measured Values - Beurer BM 85 Mode D'emploi

7. Saving, displaying and deleting measured
values
The results of every successful measurement are stored
together with the date and time. The oldest measurement
is overwritten in the event of more than 60 measurements.
• To access memory recall mode, the blood pressure
monitor must first be started. To do this press the
START/STOP button .
• Within 3 seconds of the full-screen display appearing,
select the desired user memory (
M2 memory button.
– To view the measurements for user memory
the M1 memory button.
– To view the measurements for user memory
, press the M2 memory button.
Your last measurement will appear on the
display.
If Bluetooth ® is activated (the
appears on the display), measurements are
automatically transferred.
Press the M1/M2 button to cancel data
transfer. The device will show average val-
ues. The symbol is no longer shown.
Press the M1 memory button if you have selected user
memory 1.
Press the M2 memory button if you have selected user
memory 2.
33
) with the M1 or
, press
symbol