Cleaning And Maintenance - Beurer BM 93 Cardio Mode D'emploi

Proceed as follows to transfer values:
Data is transferred if Bluetooth
appears on the display.
Step 1: BM 93
Bluetooth
Step 2: "beurer HealthManager" app
In the "beurer HealthManager" app, add the BM 93 under "Settings/My devices".
Step 3: "beurer HealthManager" app
Please follow the instructions in the app.
The "beurer HealthManager" app must be active to allow data transfers.

10. Cleaning and maintenance

• Clean the main unit and cuff carefully using a slightly damp cloth only.
• Do not use any corrosive cleaning agents or solvents.
• If the surfaces of the ECG electrodes are dirty, clean them with a cotton bud soaked in rubbing
alcohol.
• Under no circumstances should you hold the main unit or cuff under water, as this can cause
liquid to enter and damage the device internally.
• No heavy objects should be placed on top of the device when in storage. Remove the batteries.
The cuff line should not be bent sharply.
® has been activated in the settings menu. The Bluetooth
® is always activated when device is turned on.
51
® symbol