Introduction For Buttons On Remote Controller - Gree GWH09ACC-K6DNA1A/I Manuel D'utilisateur

Introduction for buttons on remote controller

Note:
● This is a general use remote controller it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press
the corresponding button on the remote controller that the unit will keep the
original running status.
● After putting through the power, the air conditioner will give out a sound.
Operation indicator "
models). After that, you can operate the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller, the signal icon "
on the display of remote controller will blink once and the air conditioner will give
out a "d i" sound, which means the signal has been sent to the air conditioner.
● As for the models with functions of WiFi or wired controller, the indoor unit must
has been controlled by standard remote controller under auto mode first, and then
the function of adjustable temperature under auto mode can be realized by APP
or the wired controller.
● This remote controller can adjust the temperature under auto mode. When matching
with the unit which is without the function of adjustable temperature under auto mode,
the set temperature under auto mode may be invalid, or the displayed set temperature
on the unit is not same as that on the remote controller under auto mode.
1
ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
2
MODE button
Press this button to select your required operation mode.
● W h e n s e e l t c n i g
to the sensed temperature. Press "F AN" button can adjust fan speed. Press
" " / " " button can adjust fan blowin g angle.
● After selecting cool mode, air conditioner will operate under cool mode. Cool
indicator " " on indoor unit is ON (This indicator is not available for some
models). Press "▲" or "
button to adjust fan speed. Press "
● When selecting dry mode, the air cond tioner operates at low speed under dry
mode. Dry indicator "
for some models). Under dry mode, fan speed can't be adjusted.
Press " " / "
● W h e n s e e l t c n i g
no heating. All indicators are OFF,Operation indicator is ON. Press "FAN" button
" is ON (red indicator the colour is different for different
AUTO COOL
a u o t m o d , e a r i c o
" button to adjust set temperature. Press "FAN"
" on indoor unit is ON (This indicator is not available
" button to adjust fan blowing angle.
a f n m o d , e h t e a r i
DRY FAN
n d t i o i n r e w l l i o p e
" / " " button to adjust fan blowing angle.
c o n t d o i n r e w l l i o n
9
HEAT
a r e t a u o t m a c i t a y l l
y l b o l w a f , n n o c
"
a c c o d r n i g
o o n i l g a n d