Fl Ame Characteristics; Restricting Vertical Vents - Napoleon Inspiration ZC Série Manuel D'installation Et D'opération

5.3 fl ame characteristics
It's important to periodically perform a visual check of
the pilot and burner flames. Compare them to the
illustration provided. If any flames appear abnormal,
call a service person.
5.4

restricting vertical vents

Some vent confi gurations may display a very active fl ame.
If this appearance is not desirable, the vent exit may be
restricted using a restrictor plate. Bend the fl ap up as shown
to reduce the velocity of the exhaust gases, slowing down the
fl ame pattern and creating a more traditional appearance.
adjustments
3/8" - 1/2"
(9.5mm - 12.7mm)
ADD IMAGE
Flame must envelop
HERE
upper
3/8" to 1/2"
(12.7mm - 9.5mm) of
thermocouple &
thermopile
EN
17
W415-2359 / 08.22.19