Details Of The Control Panel; Starting Up First Time - Version With Sand Filter - Teuco 620 Mode D'emploi

EN

DETAILS OF THE CONTROL PANEL

Display
Function buttons

STARTING UP FIRST TIME - VERSION WITH SAND FILTER

This procedure must be carried out when the system is first started up, and following any
operations that require the pool, the overflow tank, the filter and the recirculation pump to be
drained completely. The sand needs to be renewed only after several years use.
When this operation becomes necessary, contact an authorized Teuco service centre.
1. Remove the canvas from the minipool
See "Minipool Canvas" .
2. Isolate the system from the power supply
Set the main switch to the "OFF" position.
3. Close the valves
Set the filter valve to position 0.
Close all section valves along the various pipelines.
32
Menu/ok
Confirm Technical
Assistance Menu operations
Filter pump
Three position switch: MAN-STOP-AUTO
Main switch
ON/OFF
Heater
Shift Key ON/OFF switch
Led
Heater on/off indicator
620