Sanitas SBM 45 Mode D'emploi page 26

Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory 2 x 60 memory spaces
Dimensions L 100 mm x W 150 mm x H 58 mm
Weight Approx. 475 g (without batteries)
Cuff size 22 to 30 cm
Permissible operating +5 °C to +40 °C, ≤90 % relative air
conditions humidity (non-condensing)
Permissible storage -20 °C to +55 °C, ≤95 % relative air
conditions humidity, 800 –1050 hPa ambient
pressure
Power supply 4 x 1,5 V
Battery life For approx. 500 measurements, de-
pending on the blood pressure level
and/or pump pressure
Accessories Instruction for use, 4 x 1.5 V AA bat-
teries, storage pouch
Classification Internal supply, IPX0, no AP or APG,
continuous operation, type BF ap-
plied part
Technical information is subject to change without notifica-
tion to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
• This device is in line with the EU Medical Devices Direc-
AA batteries
• The accuracy of this blood pressure monitor has been
26
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may in-
terfere with this unit. More details can be requested from
the stated Customer Service address or found at the end
of the instructions for use.
tive 93/42/EC, the "Medizinproduktegesetz" (German
Medical Devices Act) and the standards EN 1060-1 (non-
invasive sphygmomanometers, Part 1: General require-
ments), EN 1060-3 (non-invasive sphygmomanometers,
Part 3: Supplementary requirements for electro-mechan-
ical blood pressure measuring systems) and IEC 80601-
2-30 (Medical electrical equipment – Part 2 – 30: Particular
requirements for the safety and essential performance of
automated non-invasive blood pressure monitors).
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.