Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Touch screen activation switch
The device features a touch screen display. To prevent the
screen from being activated accidentally, keep the touch
screen activation switch set to OFF when the device is not in
use. To operate the device, move the touch screen activation
switch to ON. When the touch screen display is touched
(START/STOP button or MEM button), a beep is output.
Tip: You can switch off the device at any time by setting the
touch screen activation switch to the OFF position.
Cuff holder
Thanks to the cuff holder on the underside of the device,
you have the option of conveniently storing the cuff. To do
so, push out the cuff holder with both thumbs until it locks
into place (see also Chapter: Inserting battery).
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured pulse
5. Pump up, release air (arrow)
6. Memory display, average value ,
morning
, evening
memory space
7. WHO classification
9
8
7
, Number of
6
8. "Change battery" icon
9. Arrhythmia recognition
4. Prepare measurement
Inserting battery
• Push the cuff holder up-
wards at the rear of the
device until it locks into
place.
• Open the battery com-
partment lid.
• Insert four AA 1.5 V
alkaline batteries. mak-
ing absolutely sure that you insert them with the correct
polarity as marked. Never use rechargeable batteries.
• Replace the battery cover carefully.
1
If the battery change
measurement is no longer possible and you must replace all
2
the batteries. Once batteries have been removed from the
device, the time must be reset.
Used batteries do not belong in the household waste. You
3
are legally obliged to dispose of the batteries. Dispose of
them via your specialist electrical supplier or local collec ting
4
point for recyclable waste.
5
20
is continuously illuminated,
Publicité
Table des Matières
