Care Of Your Steam Mop - shark LIFT-AWAY PRO STEAM POCKET MOP Mode D'emploi

Care of Your Steam Mop

fig. 28
AFTER USE AND STORAGE
1
When you have finished using the Handheld Steamer,
reattach it to the mop by first placing the bottom of
the Handheld Steamer into the cradle of the mop
housing. (fig. 28)
2
Then slide the top end of the Handheld Steamer into
the mop housing and snap into place.
NOTE: Make sure all attachments are removed
before reuniting the Handheld Steamer with the
Steam Mop.
3
If you are also done mopping, press the ON/STEAM
SETTING button until the LED light turns flashing
blue. This stops the unit from steaming. Unplug
the cord from the outlet and place the mop into the
upright position. Let the unit cool for 2-3 minutes.
Remove the cleaning pocket by releasing the quick
fasteners and using the lavender loop on the side of
the pocket, avoiding contact with the hot pocket or
dirt. (fig. 29)
fig. 29
fig. 30
4
Empty the water tank before storage. Remove the
water tank cap and empty the tank over a sink.
Replace the water cap. (fig. 30)
5
To store the Shark
Mop hanging up, first remove the head (after it has
cooled and the steam has been released) then hang
on a large hook. (fig. 31)
6
Place the Direct Steam Nozzle on the storage clip for
easy accessibility.
fig. 31
Lift-Away Pro Steam Pocket
® ™
www.sharkclean.eu
®
59