Using Your Removable Handheld Steamer with Flat Scrubber
Cleaning Tip: The Flat Scrubber is designed for cleaning a variety of surfaces and is exceptional on those that are
large and flat including counter tops, table tops, walls mirrors, windows, stairs, shelves and other similar surfaces.
Super absorbent micro-fibre bonnet loosens, lifts, and locks in dirt and grime while sanitizing at the same time.
fig. 23
1
To attach the All-Purpose Scrubber Pad, place the
pad exterior side down on a flat surface (lavender
tab indicates the bottom of the pad) and insert the
top of the Flat Scrubber Tool into the top portion of
the pad and then pull the pad over each side of the
back edge.
2
Press the Flat Scrubber Tool onto the Accessory
Hose until it clicks into place. (fig. 23)
3
Select either DUST, MOP or SCRUB mode by
pressing the ON/STEAM SETTING button and wait
until the selected setting indicator light turns solid
blue. Hold down the steam trigger to start steaming.
(fig. 24)
fig. 24
4
To remove the Flat Scrubber Tool, press and hold
down the Accessory Hose release button. Then slide
out the Flat Scrubber Tool. (fig. 25)
CAUTION: Do not press the steam trigger while
attaching or removing the Flat Scrubber Tool.
CAUTION: Do not use the Flat Scrubber Tool without
the All-Purpose Scrubber Pad attached.
fig. 25
www.sharkclean.eu
57