shark LIFT-AWAY PRO STEAM POCKET MOP Mode D'emploi page 50

Using Your Steam Mop - cont'd
3
Press the ON/STEAM SETTING button once for
DUST setting (DUST lighted setting indicator will
flash and turn solid blue when it is ready to use).
DUST setting is a light steam for a quick dusting and
best dry time. (fig. 9)
Press the ON/STEAM SETTING button twice for
MOP. MOP setting is for normal, everyday steam
cleaning. (fig. 10)
Press the ON/STEAM SETTING button three times
for SCRUB. SCRUB setting is for heavy cleaning
and will leave floors damp. When using the cleaning
pockets with the scrubbing strips use the scrubbing
side of the cleaning pockets when using the SCRUB
setting.
After you have selected your desired steam setting,
the setting indicator light will flash and turn solid blue
when it is ready to use.
To better understand which steam setting to use for
your cleaning task, see page 10.
50
fig. 9
fig. 10
fig. 11
4
Clean your floors with a forward and backward
motion. (fig. 11)
When you are done, press the ON/STEAM SETTING
button until the light blinks blue as in standby mode.
NOTE: When using your Shark
Mop in MOP mode be careful not to
Steam Pocket
®
press the steam trigger on the Handheld Steamer,
as it will activate STEAM SETTING mode. If this
happens, press the ON/STEAM SETTING button one
time to reactivate your steam selection.
Lift-Away Pro
® ™