Assembling Your Steam Mop - shark LIFT-AWAY PRO STEAM POCKET MOP Mode D'emploi

Assembling Your Steam Mop

IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use.
Never fill the mop, attach the mop head, change
or remove the cleaning pocket when the mop is
plugged into the wall. To prolong the life of your
Shark Lift-Away Pro Steam Pocket
® ™
recommend using distilled water. Make sure you
only add water to the tank. Chemicals or cleaning
solution may damage the appliance and could be
unsafe for you and your family.
fig. 1
1
Mop we
®
2
STEAM MOP ASSEMBLY
Insert the Mop Handle end labelled " " into the
Steam Mop Housing lined up with Shark
sure it is inserted past the line printed on the pole.
Secure the assembled handle and pole by using the
large screw and a Phillips or a flat head screw driver
(screwdriver not included). (fig. 1)
Insert the Handheld Steamer into the Steam Mop
Housing. (fig. 2)
www.sharkclean.eu
fig. 2
. Make
®
47