Güde GAH 1300 Traduction Du Mode D'emploi D'origine page 15

Minimum Age
Only persons above 16 years of age are allowed to work with the unit.
Exempted from the provision is the use of the juvenile trainees if they work in the course of their professional training with an aim to
obtain the skill under trainer supervision.
Training
Use of the unit requires adequate lesson by a professional or the use of the manual only. Special training is not required.
Technical Data
Supply connection:
Frequency:
Protection class:
Max. output:
Motor Speed:
Cutting block diameter:
Working area L x B
Cutting block speed :
Blade:
Max. cutting depth:
Max. working width:
Exhaust connection diameter:
Stop maximum angle:
Connection cable:
Acoustic output level:
Weight ca:
Dimensions L x W x H
Ordering No.:
Transportation and Storage
The unit is designed for stationary use only.
If out of use, the unit should be stored in a dry locked room.
Assembly and Initial Operation
Structural Group 1
Fig. 2
Fig. 3
230 V
50 Hz / IP 20
II
1300 W P1/ S6-60%
-1
15.500 min
47 mm
695 x 155 mm
38,2 m/s
2
2,5 mm
155 mm
55 mm
45°
1,8 m / H05 VV-F
93,5 dB
12,8 kg
690 x 155 x 280 mm
55009
Delivery-contained parts and
accessories
Fig. 1 – Pos. 1
Fig. 1 – Pos. 2
1. Shaft lock
2. Exhaust connection
3. Motor ventilation
15