Factory Default Settings And Bluetooth; About The Factory Default Settings; Resetting The Appliance; Switching Bluetooth On And Off - Boneco H700 Mode D'emploi

Masquer les pouces Voir aussi pour H700:

Table des Matières

Les langues disponibles

FACTORY DEFAULT SETTINGS AND BLUETOOTH

If your BONECO appliance control system does not

function the way you are expecting, or if you would

like to delete all adjustments, you can reset the ap-

pliance to the factory settings. This deletes all ad-

justments and settings.

After the reset, the BONECO appliance has to

be paired with the smartphone again so that

the control system can continue working with the

app (see page 52).

Press and hold the output regulator until the "Fd"

(Factory default) notice appears on the display.

Now the BONECO appliance is in the same state as

when it was first started.

Switching Bluetooth off:

1. Press and hold the output regulator for about 5

seconds until the "bt" notice flashes on the dis-

2. Turn the output regulator until the display shows

"--" and confirm your selection by briefly pressing

the output regulator again.

3. Now Bluetooth is switched off.

To reactivate Bluetooth, you have to have the

smartphone paired again (see page 52).

Table des Matières