Factory Default Settings; About The Factory Default Settings; Resetting The Appliance - Boneco H300 Mode D'emploi

FACTORY DEFAULT SETTINGS

ABOUT THE FACTORY DEFAULT SETTINGS

If your BONECO appliance control system is not func-
tioning the way you are expecting, or if you would
like to delete all adjustments, you can reset the ap-
pliance to the factory settings. This deletes all ad-
justments and settings.
After the reset, the BONECO appliance has to
be paired with the smartphone again so that
the control system can continue working with the
app.

RESETTING THE APPLIANCE

Reset your BONECO appliance to the factory settings
by pressing and holding the black button on the ap-
pliance for approx. 30 seconds until the LEDs light
up in red. Now the BONECO appliance is in the same
state as when it was first started up.
27
en