Cleaning The Interior Parts; Important Notes; Water Tank; Water Base - Boneco H700 Mode D'emploi

60

CLEANING THE INTERIOR PARTS

en

IMPORTANT NOTES

Use a cleaning brush and a damp cloth for cleaning.
Always add a small amount of dishwashing deter-
gent to the hot water.
Always unplug the BONECO H700 from the
power outlet before you start cleaning or do-
ing maintenance! Failure to do so can result in elec-
tric shock and fatal injury!
Clean the inside of the BONECO H700 regular-
ly; otherwise mold can form, which is harm-
ful to health.
Do not use alcohol or corrosive cleaning
agents for cleaning.
Do not clean the BONECO H700 in a dishwash-
er. High temperatures can deform the parts
and make them unusable. This damage is not cov-
ered by the warranty.

WATER TANK

1. Fill the water tank halfway with hot water and
add a small amount of dishwashing detergent.
2. Thoroughly clean the inside of the water tank by
hand or with a suitable cleaning brush.
3. Also clean the cover.

WATER BASE

1. Pull the water base out of the BONECO H700.
2. Remove the drum with the AH700 evaporator
mat.
3. Remove the A7017 Ionic Silver Stick® and the roll-
ers.
4. Clean the water base and all of the parts inside.
These can be removed for cleaning.