Lumie Bodyclock ADVANCED 200 Notice D'utilisation page 6

BCAI0708 14/8/07
English
6 Setting the clock to 12 or 24 hours
The time display is pre-set as a 12-hour clock. If you prefer a 24-hour
clock...
A must be OFF (button depressed).
Press P repeatedly until program message 12hr appears.
Immediately press + or – until 24hr appears.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
7 Using the Bodyclock as a reading light
Press + until the lamp is as bright as you want it.
To switch off the light, press – until it goes completely dark.
8 Setting the sunrise
The wake-up function is ON when A is elevated and
Wake-up time is pre-set for 7:00a.m. If you want a different time...
A must be OFF (button depressed).
Press P repeatedly until the program message ALARM TIME
appears.
Immediately press + or – until the alarm time is set. If you are using
the 12-hour clock pay attention to the PM indicator to make sure
you set the correct wake-up time! The PM indicator will light up
when the time shown is between noon and midnight.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
6 | www.lumie.com
18:25 Page 6
(to wake you up)
| lumie careline 0845 658 9292
is lit up.