Lumie Bodyclock ADVANCED 200 Notice D'utilisation page 8

BCAI0708 14/8/07
English
12 Setting the sunset
To start the sunset sequence:
Press + until the lamp is as bright as you want it.
Press A ON so button is elevated and
Sunset will start and the lamp will slowly fade down.The wake-up
sequence will activate at its usual time.
To start the sunset sequence when you don't want the wake-up
sequence (such as on a Friday night):
Make sure A is OFF (button depressed).
Press + until the lamp is as bright as you want it.
Press + and – together.
Sunset will start and there will be no wake-up sequence.
To choose sunset speed:
Make sure A is OFF (button depressed).
Press P repeatedly until program message FADE DOWN 30 (or
60 or 90 or 15) appears.
Immediately press + or – until the desired sunset speed appears.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
13 Setting the sunset to end as a nightlight
Rather than have the sunset end in darkness, you can set it to act as
a nightlight at 10% of the intensity of the lamp.
A must be OFF (button depressed).
Press P until program message NITELITE OFF appears.
Immediately press + or – until NITELITE ON is set.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
8 | www.lumie.com
18:25 Page 8
(go-to-sleep program)
| lumie careline 0845 658 9292
is displayed.