Télécharger Imprimer la page

Air Purification; Heating - Bosch PAM17000 Mode D'emploi

Masquer les pouces Voir aussi pour PAM17000:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
Do not forget to replace the plug onto the
water drainage pipe when you change
function, otherwise the appliance will shed
water when operated.
Remember that ambient temperature must
be 18ºC or higher in order for the appliance
to work.

Air purification

The air entering the room (ventilation) is
circulated through a purifying filter when the
appliance is set to this function.
The appliance is fitted with a basic filter and a
purifying filter for:
- Pollen, bacteria and dust.
Put the air expulsion tube in the same
position as for dehumidification.
Lift the air director on the top of the
appliance. This air director is not installed
on the appliance on PAM18100 models.
See figures 25 and 26 in "Heating".
Select the purifying speed: maximum
silent
, Fig. 24.
When the appliance or the model is fitted
with optional filters, we recommend that
these be left on regardless of the function
selected (cooling, dehumidification, air
purification) in order to purify the air more
effectively.
Note:
Due to the internal configuration of the
PAM17000 models, air is also expelled
outdoors when the appliance is set to the
ventilation function. In order to reduce the
noise produced, it is recommended that you
remove the air expulsion tube.
Instructions for Use
0
Fig. 24

Heating

(only on PAM18100)
When set to position
the air in the room until the temperature set by
the user is reached. The air in the room is
purified at the same time.
Plug the appliance into the mains electricity
supply.
Put the air expulsion tube in the same position
as for dehumidification.
This air director is not installed on the
appliance on PAM18100 models. The
manufacturer recommends that an air
director be previously installed in order to
distribute the air flow better. The director is
fitted as shown in the following figures.
or
Select the heating function, Fig. 27.
Set the thermostat to the desired
temperature. When this temperature is
reached, the appliance turns itself off
automatically. It comes back on again when
the temperature drops 2-3ºC.
Warning!
Do not cover the air intakes or outlets on
your appliance!
29
, the appliance heats
Fig. 25
Fig. 26
0
Fig. 27

Publicité

loading

Ce manuel est également adapté pour:

Pam19000Pam18100