Manual Operation; Content Of The Package - Erreka ARC Mode D'emploi

4

MANUAL OPERATION

By way of the supplied key
By way of release box (optional, not supplied)
A release box can be installed if required since the
actuator has a device to install the release cable.
5

CONTENT OF THE PACKAGE

O
Actuator package:
1 Actuator
2 Wall bracket
3 Cover
4 Release key
5 Release orifice cap
Fig. 2 Content and spare parts
3
The arm components are supplied separately
6 Screws to attach the
actuator to the bracket
7 Elastic washers
8 Washers ø10
9 Screws to attach the cover
to the bracket
10 Release spring
DESCRIPTION OF THE PRODUCT

In the event of need, the gate may be operated
manually, first operating the release mechanism.
A- Release
1 Remove the cap (1) and introduce the key (2). Turn
until you hear a click.
2 Move the gate manually.
B- Locking
1 Introduce the key (2) and turn until you hear a click.
The gate remains locked.
2 Position the cap (1).

In order to install the release cable, see "Installation
of release box for manual drive" on page 34.
Arm package (AAR01 or AAR02):
11 Actuator arm
12 Articulated arm
13 Gate support
14 Joint screws
15 Self-locking nuts
16 Joint washers
17 Screw and washer to attach the arm
to the shaft
ARC electro-mechanical actuator
29