Symbols And Their Meanings; Hazard Warnings; Technical Instructions; General Instructions - Storch PS 12 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42

2. Symbols and their meanings

2.1. Hazard warnings

Hazard warnings are marked with symbols for ease of
identification. Always observe these instructions!
Immediate risk!
Texts marked with this symbol warn of imminent danger.
Failure to observe this danger can cause death, serious
injury or serious damage to property.
• Always observe these instructions!
Strictly prohibited!
Texts marked with this symbol warn of an action that is
strictly prohibited. Failure to observe this prohibition can
cause death, serious injury or serious damage to property.
• Always observe these instructions!
Specific warnings
Further notes in the document warn of specific hazards,
such as dangerous electrical voltage. The corresponding
specific symbol is used for each specific hazard. Failure
to observe this warning can cause death, serious injury or
serious damage to property.
• Always observe these instructions!

3. General instructions

3.1. Purpose of these operating instructions

The operating instructions are intended to inform the
plant manager as well as the assemblers and operators of
the machine on the construction site. It contains import-
ant information for
• safe use
• optimal results
• a long service life
Risks of misuse
Failure to comply with the operating instructions may
result in a danger to life and health of the operator and
may damage the equipment.
Translation of the original instruction

2.2. Technical instructions

Important notice!
Texts marked with this symbol provide important informa-
tion on the effective use of the machine.
• Always observe these instructions!
Useful tip!
Texts marked with this symbol indicate useful tips for
effective use of the machine.
• Always observe these instructions!
• Read these operating instructions carefully before han-
ding them over to your fitters or operators!
• Please ensure that fitters and operators read these ope-
rating instructions carefully before installing and commis-
sioning the machine!
• Always keep the operating instructions at hand and in a
clearly legible condition!
84

Publicité

Table des Matières
loading

Table des Matières