FujiFilm instax square SQ10 Guide D'utilisation page 28

SPECIFICATIONS
Printer
EN
Film
Photo capacity
Film size
Image size
Supported image size
Printing solution
Printing levels
Supported image format
Printing time
Print timing
Printing function
Reprint
Digital zoom
Film detection
Others
LCD monitor
Input/Output terminals
Battery
Charging function
Printing capacity
Charging time
Dimension
Weight
* Specifi cations above are subject to change for improvement.
28
instax_D-SQ_6lang.indb 28 instax_D-SQ_6lang.indb 28
FUJIFILM Instant Film "instax SQUARE" (Purchased separately)
10 prints/pack
86 mm x 72 mm
62 mm x 62 mm
800 x 800 dots
12.5 dots/mm (318 dpi, 80 μm dot pitch)
256 levels per color (RGB)
JPEG (Some images saved with a photo editing/processing software may
not be displayed or printed.)
Approx. 12 seconds
Printing shortly after shooting/Printing after selecting image
Images on built-in memory/micro SD card
Printable up to the past 50 prints
(Up to 50 images stored in print history)
Up to 2.4 X in printing (Output pixels: 800 x 800)
Yes (Automatic ejection when inserted)
3.0-in. (7.6 cm) TFT color LCD monitor
Pixels: Approx. 460k-dots
Micro USB (For charging only)
NP-50
Built-in
Approx. 160 prints (From when the battery is charged fully)
* Varies depending on the conditions of use.
Approx. 3 to 4 hours (Using 0.5 A USB port)
* Varies depending on air temperature.
119 mm x 47 mm x 127 mm (W x D x H)
450 g (includes fi lm pack and battery)
2017/2/20 14:12:15 2017/2/20 14:12:15