Printing From Print History (Reprint) - FujiFilm instax square SQ10 Guide D'utilisation

Printing from Print History (Reprint)

Print an image with the same settings (e.g. image effect) as those specified when you printed the image in the past.
EN
Follow the steps below for operation.
~
Press the (Playback) button.
The most recent image will be displayed.
Ÿ
Press the MENU/OK button.
The playback menu appears.
!
Select PRINT HISTORY, then press the MENU/OK
button.
The screen to select an image appears.
• The latest 50 print histories are stored in the
memory.
• If the print histories exceed 50, new print history
overwrites the oldest one.
⁄
8 9
Press or to select an image to print.
8
Pressing displays a previous image.
9
Pressing displays a next image.
• You can select a view with four or nine frames.
22
instax_D-SQ_6lang.indb 22 instax_D-SQ_6lang.indb 22
@
Press the (Print) button.
¤
Press the MENU/OK button.
Printing starts.
• Press the (Back) button to cancel printing.
#
When the film has been ejected (the camera stops
making a sound), grab the edges of the film, then
take it out.
• You cannot save the print history on a memory card.
• All print histories are deleted if you initialize the
memory. (Page 26)
• You cannot edit or apply effects on the images in the
print history.
2017/2/20 14:12:14 2017/2/20 14:12:14