Using The Flash - FujiFilm instax square SQ10 Guide D'utilisation

More on Photography

Using the Flash

EN
Use the flash when shooting at night or indoors under low light.
~
Press the MENU/OK button on the shooting
screen.
The shooting menu appears.
Ÿ
Select FLASH, then press the MENU/OK button.
!
Select the flash setting, then press the MENU/OK
button.
See the right column for details on each flash
setting.
⁄
Press the shutter button to shoot.
20
instax_D-SQ_6lang.indb 20 instax_D-SQ_6lang.indb 20
■ Flash settings
Select one of the settings below.
• AUTO FLASH
The flash fires automatically when the camera
recognizes it is dark. Recommended in most
situations.
• FORCED FLASH
The flash always fires regardless of the brightness of
the subject. Use this setting for backlit subjects.
• SUPPRESSED FLASH
The flash does not fire even when the subject is poorly
lit. Recommended when using a flash is prohibited.
We recommend you use a tripod when it is dark.
• SLOW SYNCHRO
As the flash fires with slow shutter (slow synchro) in a
dark place, the background and subject in front of it
are photographed brightly.
Note that the picture may be overexposed if you use
this setting in a bright place.
• RED EYE & SLOW
This setting minimizes "red-eye", which is caused
by the flash reflecting from the retinas of portrait
subjects when you use flash in a dark place.
When you select this setting, the flash fires several
times as a pre-flash to minimize red-eye.
2017/2/20 14:12:12 2017/2/20 14:12:12