Cooper Lighting Solutions Metalux RSRK Instructions D'installation page 4

Installation Instructions – RSRK
Optional EM and Sensor Mounting (steps 1-6)
1. EM UNIT - Install EM unit into existing fixture housing.
EM unit should be mounted so that there is sufficient
cable length to make all connections to LED driver
and EM test switch. Mount EM unit near the end of
the housing where the EM test switch will be located.
(Figure 7 .)
Self-Tapping
Screws
Figure 7.
2. Test Switch and/or Sensor (EM and MS) - Remove
appropriate KO(s) from hole size(s) needed
(Figure 8, 10) and Install Sensor and/or EM Test Switch
into hole, ensuring connector is accessible.
(Figure 9, 11.)
Adapter
Test Switch
Connector
Figure 8.
4
COOPER LIGHTING SOLUTIONS
Emergency
Battery Pack
(EL7/EL14)
Housing
KO(s)
Accessory
Bracket
(EM/MS)
Sensor
IB519095EN Installation instructions
Test Switch
Connector
Figure 9.
Test Switch
KO(s)
Figure 10.
MS Connector
Figure 11.
Sensor
Mini Integrated
Sensor
Accessory Bracket
(EM/MS)
MS Connector
Mini Integrated
Test Switch
Sensor