Publicité
Les langues disponibles
Les langues disponibles
4.
Install Tether cable to Lighting fixture housing using self-tapping screw at two places. (Figure 5.)
Retrofit Channel Cover
Tether Cable
Aligner Tab
Figure 5.
5.
Connect all of the fixture wires to power supply wires: White to White, Black to Black and optional Blue wire for EM
version (not shown). If applicable connect Purple and grey to dimming system (Figure 6). For routing the wires - see step
11 then assemble the retrofit channel cover to the retrofit bracket - see step 2 in page 7 . For Standard option, skip steps
2, 3, 4, 6 from page 4 and then Install lens - see step 6 in page 6.
Black Wire
White Wire
Figure 6.
Tether Cable
Connectors
Retrofit Channel Cover
COOPER LIGHTING SOLUTIONS
Installation Instructions – RSRK
Aligner Tab
Housing
Board Connectors
Purple Wire
Grey Wire
P-Nuts
Driver
IB519095EN
3
Installation instructions
Publicité
