Heating Control Unit - Becker Centronic VarioControl VC210 Notice De Montage Et D'utilisation

Saving and deleting dimming values
The radio receiver must not be in programming mode. The
dimming range can only be set via the master transmitter.
+ > 3 s Preset dimming value 1 is saved (acknowledgement -
flashes 1x)
+ > 3 s Preset dimming value 2 is saved (acknowledgement -
flashes 1x)
+ > 3 s Both dimming values are deleted (acknowledgement -
flashes 2x)
Switch heating ON/OFF
< 0.5 s On
< 0.5 s On
< 0.5 s Off
Automatic switch-off of heating
An automatic switch-off is integrated in the heating control unit. This switch-off
timer is started when the heating is switched on and automatically switches off
the heating after 5 hours, unless a "Stop" command is issued in the meantime.
This time can be restarted by switching the heating on and off again. Re-
peatedly pressing the "Up" or "Down" button once the heating is switched on
will not extend the setting of the switch-off timer. This switch-off timer only ap-
plies to the heating function.
34 - en

Heating control unit