Others; Useful Functions; Setting Auto Standby - Onkyo A-9130 Mode D'emploi

Useful functions

Setting auto standby

1
2
3
ON
OFF
20
(BLINKING)
(LIGHTING)
SETUP
When automatic standby is on (default value), the unit
automatically switches to standby mode after 20 minutes of
no audio input without any operations.
1. Press SETUP on the remote controller.
0 If this unit is set to be used as a power amplifier, the
SETUP button will not work. Check the setting. (p19)
2. Press D/C on the remote controller several times to
make the "DIRECT" and "PHASE MATCHING BASS"
indicators either blink or light.
0 The indicators blink or light and the current setting
value is displayed.
3. Press B/A on the remote controller to switch auto
standby on or off.
- On (default value): "DIRECT" and "PHASE MATCHING
BASS" indicators are blinking
- Off: "DIRECT" and "PHASE MATCHING BASS"
indicators light
4. To exit the settings, press SETUP.
0 The setting mode ends after 5 seconds elapse with no
operations performed.
0 60 seconds before switching to standby mode, the input
source indicator for the currently selected source starts
blinking.
0 Depending on the connected device, the auto standby
feature may not engage due to factors such as noise.

Others

/ / /